Whole-Home Repiping in Birmingham, AL
A home with more than one pipe leak in the past year has usually reached a point patching one section won't fix. The same goes for water that runs rusty-colored or weak throughout the house.
Response time is confirmed on the call itself.
This usually comes up after a second or third pipe leak in the same year, or when water runs rust-colored or noticeably weaker than it used to throughout the whole house rather than at one fixture. Both patterns point to the pipe material itself failing broadly, which is what repiping addresses.
Galvanized steel supply lines, common in Birmingham homes built before the 1960s, corrode from the inside over decades until the interior diameter narrows and rust starts flaking into the water itself. Once that corrosion is widespread, repairing one leaking section just means the next section fails on a similar timeline - which is the actual case for whole-home repiping over another round of spot repairs.
What actually gets replaced
A full repipe replaces all the home's water supply lines, typically with PEX for its flexibility and resistance to the corrosion that affects older metal pipe. A partial repipe targets a specific section - one bathroom, one floor - when the rest of the home's plumbing is confirmed to be in better condition by inspection rather than assumed. Drain lines are a separate consideration from supply lines and are evaluated independently, since they fail on a different timeline and for different reasons.
Beyond just running new pipe
A repipe includes shutting off and draining the existing system, running new supply lines to every fixture, pressure-testing the new lines before anything is closed up, and patching drywall where walls needed to be opened. Fixture connections are also inspected as part of the job, since a repipe is a natural point to catch a worn shutoff valve or supply line before it becomes a separate call later.
Water is typically off only for the working hours of each day the crew is on-site, restored each evening, rather than left off for the full duration of a multi-day job.
A repipe is also a natural point to relocate a fixture or add a shutoff valve where one is missing, since the walls are already open for the main work and adding either separately later would mean opening the same wall twice.
What drives the price
- Full versus partial repipe scope.
- Home size and number of fixtures being connected.
- Wall access - open-wall new construction versus a finished, occupied home.
- Drywall and finish repair after the work, if walls need to be opened.
Want your real number? Call (855) 575-2890 A technician inspects the home before quoting the scope.
A single leak that hasn't repeated is more likely a leak detection and spot-repair situation rather than a full repipe - repiping is for a pattern of failures, not a first-time leak.
- Note how many pipe leaks the home has had, and roughly when, over the past year or two.
- Check whether water runs discolored throughout the house or just at one fixture.
- Have any prior repair records ready if the home has had multiple leaks.
Common questions
How do I know if I need a full repipe or just another repair?
A single, first-time leak is usually just a repair. Repeated leaks in different spots over a short period, or rust-colored water throughout the house, point to widespread pipe deterioration that repiping actually addresses.
How long does a whole-home repipe take?
It varies with home size and access, but a typical single-family home is usually completed within a few days, with drywall and finish repair following the plumbing work itself.
Do I have to move out during a repipe?
Not usually for most of the job, though water will be shut off during working hours, and some rooms may be inaccessible temporarily while walls are open.
Is PEX better than copper for a repipe?
Both are viable current materials. PEX is more flexible and resistant to the corrosion that affects old galvanized pipe, and is commonly used for repipes; copper remains a valid option depending on the home and preference.
Will a repipe fix low water pressure throughout the house?
If the low pressure is caused by corrosion narrowing the interior diameter of old pipe, yes - new pipe restores the full diameter. If it's caused by something else, like a municipal supply issue, a repipe won't change it.
Serving greater Birmingham, AL
Whole-Home Repiping in Birmingham, done right.
Upfront pricing, real dispatch, licensed-trade technicians.
Call (855) 575-2890